bet356体育投注登录 - Johnny·welcome

Welcome to the official website of ULiROBOTS, we are dedicated to serve you
CUSTOMIZED HOTELINE+86 400-869-3332
Position:主页 > EN > News > Q&A >

What do you need to pay attention to when the soldering tin is completed in the automatic welding machine?

Release time:2019-08-05 15:39Popularity:
What do you need to pay attention to when the soldering tin is completed in the automatic welding machine?For automatic soldering machine is the same time to complete the operation of the product, but some enterprises exist when the automatic soldering machine point after soldering should pay attention to that?In this respect, I believe that some enterprises do not know very well. After welding, the soldering machine should not be removed by knocking when cleaning the residual iron head.The main method is properly operated, the service life of the automatic soldering machine will be extended, and the soldering efficiency and quality can be rapidly improved in the subsequent use, and the labor cost can be saved.So what are the precautions after welding?
 
1, the machine is using 220V power supply voltage, after work, remember to turn off the power, so as not to touch the power cause accidents.
 
 2, online automatic soldering machine in cleaning the tin slag on the iron head, do not use things to knock the iron head to clean, this will not only reduce the soldering precision, serious will lead to heating core damage, or even lead to the iron head scrap.
 
 3, automatic soldering machine after soldering, to tidy up the desktop, do not have any debris, in order to better work next time.
 
4, not only in the welding or after welding, do not touch the iron head, because after welding, the temperature of the iron head is very high, if you need to replace the iron head, first turn off the power supply, and then after cooling, can be replaced or adjusted.
+86 400-869-3332
Baidu
XML 地图